Linda's Magic Workshop - Linda Britt Design

Glass Lampwork Beads are among my favorite eye candy.  When I saw this tutorial on faux lampwork beads I decided I had to try it!  This is the link for the tutorial:  https://www.etsy.com/listing/176555759/faux-glass-polymer-clay-tutorial-pack-3?ref=related-6 It is very well written, nicely illustrated and a pleasure to follow.  I recommend this! I love these beads and can't wait to make more with this technique First I started collecting the supplies and naturally I needed to order some things!  I did not have Kato liquid polymer nor did I have a heat gun.  I love tools so here was another excuse!  Now I have a heat gun!  I bought the Ryobi 11 Amp Variable-Temp Heat Gun that was suggested in the tutorial.  It is great – easy to hold and the temperature is easy to adjust!  The Kato clay I bought came in a bubble wrap envelop and the lid was loose.  Ick! What a mess.  Amazon refunded the money and I was able to salvage enough to do the project.  Finally ready! I m

    Strawberries happen to be one of my favorite fruits.  I especially love them combined with rhubarb, but         really, fresh strawberries and cooked strawberries; straight out of the field or frozen…they are all good!     When I mixed this red polymer clay with gold and yellow and added green, of course, strawberries came      to mind.  This is my interpretation of a strawberry fruit with its goodness inside and out!      I've never used the manufactured paper balls that I bought somewhere (guess we all know about that!)     and started reading about them.  https://www.etsy.com/listing/115947922/cotton-paper-balls-for-polymer-clay?utm_source=google&utm_medium=product_listing_promoted&utm_campaign=supplies_low&gclid=CKTouvLDhL4CFQpgfgod0jYA3A      First I wrapped the cotton paper ball in foil to keep it from sticking to the clay.      I cut triangles for the petals and placed them on the ball keeping in mind that it needed to be flower l

There are so many amazing places to explore in the Southwest and so many surprises.  I had never been to Cedar Breaks National Monument (near Cedar City, Utah) and in fact, I was not even aware of it.   Peter had been there and wanted to show me the area and we both wanted to take photographs.  As we drove up the mountain to 10,000+ feet, the trees thinned to a few.    It was a surprise to step out of the car, walk through the bristlecone pines, juniper trees, wildflowers and grass to look out 3 miles and down into a half-mile deep natural amphitheater.  Breathtaking actually!    This monument is open June thru October (snow in the winter precludes travel) and I understand that the fall colors are incredible in September/October.  The rock colors come from iron and manganese in a varity of combinations to produce reds, oranges and yellows with some purple.  My colors!  The Indians used to call this area the ‘Circle of Painted Cliffs.’  Again the repetition of shapes capt

Bryce National Park is fascinating.  As I walked to one of the overlooks I saw such variety of rock colors and formation shapes. I was spellbound and if it had not been so hot, I could have stayed for hours. The repetition of shapes, shapes that reminded me of pictures of Angkor Wat Cambodia from my long ago art history course, had me imagining ancient cities with ancient gods guarding those cities. While man made the Angkor buildings, nature used wind, water and temperature (freezing) to create these shapes.     The ‘hoodoos’ are tall and slender spires that rise from the arid basins.  They range in height from the height of an average man to the height of a 10 story building and no place has as many as the northern part of Bryce Canyon.  30 to 40 million years ago this was a lake bed.  You might enjoy reading more about them at   http://www.nps.gov/brca/naturescience/hoodoos.htm   The vast array of hoodoos and combination of colors is almost overwhelming.  There are

A week ago I posted in Face Book that I had finished several pair of earrings made from Hadar’s clay.  I was experimenting with techniques from her book, The Handbook of Metal Clay Textures and Form, and I promised to share my experience with you.  The larger oval pair of earrings (lower left in photo) combines Brilliant Bronze and Copper.  I carved curvy stripes in the copper oval and laid in snakes of bronze, sanded flat and fired.  I know I could polish and make them smoother and shinier but I like the more rustic look.  I used Baldwin’s Patina to bring out the color contrast. The upper right pair of earrings also combines the bronze and copper.  The back textured layer is bronze and the smaller rectangle is copper.  I was concerned that the copper might be too thick and not bond well but as you can see – no problem! The earring on the lower right also has a backing of bronze.  I carved horizontal strips and laid the copper snakes in.  Then a textured the snakes cut

Peter and I just returned from a road trip to Utah.   We drove to Coral Pink Sand Dunes that were once (170 million years ago) covered with ocean.   We climbed a steep wet sandy hill of beautiful coral colored sand and stood at the top looking across miles of coral colored sand dunes, high ridges swooping into flat beaches.   We carefully walked among the Welsh’s Milkweed plants taking pictures of the lovely thick-skinned leaves and the globe-shaped blooms.   The thick skins protect the plant from heat, wind and sand damage as the deep roots tap into water under the sand and send horizontal runners making new plants.   These plants are only found in Southern Utah and Northern Arizona and are on the federally threatened plant list. This is where I began to pay attention to the repetitions of shapes and lines throughout the road trip. I always try to be aware of design elements around me and I enjoyed focusing on this idea. I think I could have spent hours studying this inte

One of the polymer clay groups on FaceBook is 'Polymer Clay Collective'.  This is a group of artists working in polymer clay who share ideas and support each other.  I'm so glad to be a part.  A new feature of this group is the 'Polymer Clay Collective Conversations' where a different member answers a set  of questions.  I get to be first - the trailblazer! I hope you enjoy learning a little more about me and in two weeks I get to learn more about someone else. • Tell us a bit about where you live. I live in Prescott AZ right next to the national forest.   When I look out my studio windows, I often see large black ravens swooping between the pine trees.   Binoculars are always available for close viewing of our smaller forest birds.   You’ve probably read about the forest fires we have had in our area this summer.   The monsoon rains we are having are so welcome. • What do you do when you're not polymer claying? As of 2010, I became a retired interi

One of the best things about Facebook is being in a special interest group.   I belong to a polymer clay group and a metal clay group.   The polymer clay tutorials are listed and I always look.   So when Emma Ralph’s (EJR Beads) tutorial was recommended, I looked at it on her etsy site.   http://www.etsy.com/listing/113890791/polymer-clay-tutorial-by-emma-ralph I thought it was expensive and so I looked several times before I decided to buy it.   Wow! Was it worth the money.   It was well written and documented with many interesting pictures, techniques and tips!   In this blog, I want to show you some of what I learned and the ‘Illuminare’ beads I made. I followed her directions and took a couple of side trips!   The Thistle Medallion was one of the side trips. http://www.lindabrittdesign.blogspot.com/2013/02/thistle-medallion.html     This bracelet was another.   http://www.etsy.com/listing/124530104/dragonfly-bracelet I made the flat clay sheets and embellished

  Yet another project from Hadar’s Architectural Jewelry Class!   This is a knuckle buster of a ring and believe it or not it is really comfortable to wear!   Great jewelry armor! This project was about building a hollow ring using a form.   Indentations for the fingers each side of the ring made it comfortable to wear.   I combined steel and copper to make a ring I love! I used a stainless steel oval soap for my ring’s form.   Several years ago someone gave me a rectangular piece of stainless steel to use after I cut onions or garlic.   I rubbed it in my hands like soap and sure enough…it took the smell away.   When I saw the oval bar in class, I had to use it!   http://www.focalprice.com/HJ135S/Hand_Odor_Smell_Remover_Stainless_Steel_Soap_Bar_Silver.html?utm_source=CS&utm_medium=GM_US&utm_campaign=CS_GM_US_HJ135S&gclid=CMeX9KCC67UCFY8WMgodZzwA_Q Someone else used a flat stone.   We put the 4 card thick clay halfway on the form making sure there was a way to